CPD writing is one of the most important parts of CDR writing. Continuing Professional Development writing is something that you just cannot afford to neglect. It will provide information about the engineer’s current activities. As an engineer, you will learn many things while working in an organization. A CPD report conveys each and everything that you will learn in the organization. You can sum it up by saying that CPD writing will be an up-to-date report of what the engineer is doing and learning at the present times.
CPD is a compilation of the things you are doing in your engineering career. In the organization you are working currently, you will be attending many conferences and workshops, undertake many projects and will make some contributions to the various journals to increase your knowledge of engineering. You will include each and everything that you are doing in your CPD. However, if you do not have a good writing skill then you could have trouble in framing the CPD. Our writers will help you by writing the CPD for you.
These are the three occupational categories recognized by Engineers Australia for the engineering practice in Australia -
If you are applying for migration, Engineering Manager is another category recognized by Engineers Australia.
All applicants applying for the skill assessment by Engineers Australia are required to demonstrate their proficiency in the English language and to prove their English language competency; applicants are required to take one of the following tests:
IELTSEngineers Australia accepts both the General and Academic versions of the test.
TOEFL®Engineers Australia accepts the TOEFL iBT® English language test.
PTE ACADEMICFrom the 1st November 2017, Engineers Australia has also started accepting the Pearson PTE ACADEMIC™ test.
The following table indicates the minimum scores for each module:
IELTS | TOEFL iBT® | PTE ACADEMIC™ | |
Listening | 6 | 12 | 50 |
Reading | 6 | 13 | 50 |
Writing | 6 | 21 | 50 |
Speaking | 6 | 18 | 50 |
IELTS, TOEFL iBT® and PTE ACADEMIC™ results must not be more than 2 years old at the time your application is submitted.
The following applicants may be exempt from the requirement to provide an English language test:
Please note, exemptions are determined on a case by case basis and Engineers Australia reserves the right to request an English language test result at any stage of the assessment.
Basically, for engineers in Australia, CPD is the report of the knowledge and skills you attained through your working life. It will depict all the knowledge you have in the latest development of your engineering field. Our writers will help you by creating the CPD possible. They will make sure that you have a knowledge base portrayed in a document thoroughly. If you are preparing the CPD which is an essential part of your CDR, there are things that are needed to be kept in mind:
Serial # | Training Title | Start Date | Finish Date | Duration | Venue | Training organisation |
1 | MS Visio Training | DD/MM/YYYY | DD/MM/YYYY | Days | Address | Name of Organisation |
2 | ASTM | DD/MM/YYYY | DD/MM/YYYY | Days | Address | Name of Organisation |
3 | Work Health & Safety | - | - | - | - | - |
4 | ISO 9001 Certificate | - | - | - | - | - |
It must contain detailed information about the title, date, period, location and other relevant information.
You do not need to attach course certificates and events that you have been involved in. CPD is not only a summary of technical skills and knowledge but includes things like when working in a company, how you use software or coding, or a company management strategy.
You must provide CPD in a list format so that you can easily understand it. CDR application contains all relevant CPD that helps a lot in furthering a career in Australia. Inside the CPD, it only includes information on what you did, but not about how you did it.
It is not necessary to attach the entire certificate from each course you described. Since the CPD does not consist of every detail made in relation to the various activities that have been carried out, the CPD should not be too long.
The CPD must contain both formal and informal information about the engineer.
In the CPD report, you don’t have to attach any certificates of the course you have passed.
If you have mentored students or volunteered services in the field of engineering then you should include it in the CPD.There are two perspectives of the info provided in the CPD which are:
You need to include the things that are happening in your engineering career such as workshops, seminars, conferences, etc. in a short but comprehensive manner.
In this part, you will depict your competency as an engineer. The way you apply your skills and the way you are evolving as an engineer will be portrayed here.This part not only shows your engineering skills but will also show the other traits of your personality such as leadership skills, management skills, mentoring skills, writing, and communication skills. These traits are also very much vital for the growth of the engineer but also for the organization as a whole.
This is the formal part of the CPD writing where you will be giving information about the new skills and knowledge you are gathering.
CPD is a report or documentation of the skills attained by the engineer while working as an engineer. This shows the advancement of the engineer and the measures taken by the individual to aid his or her advancement in his or her particular trade of engineering.
There is a format for writing the CPD of a CDR. The format should give detailed information on the duration, location, and achievement from the training. It should include each and everything whether formal and informal work the engineer is doing for the advancement of his or her career. So, below is the format by following which one has to write down the CPD for Engineers Australia. You have to strictly adhere to this format because it is laid down by none other than the EA.
The course can be done on campus or through distance education. It should have some sort of assessment test.
This will include the technical meetings which will include the presentations of EA. Workshops and seminars will be done by the third-party practitioner.
This is an important trait. The engineer that learns from the normal activities of the workplace such as seminars or group discussions should be written here.
The study you do at your leisure time to enhance your skills must be penned down here. You should keep the records of the things you study such as the journals, books, etc. If you can then try to remember the title of the books and journals and all the other stuff that you are reading including the name of the author.
In this section, you will be writing down the time you spend in researching and preparing materials for the courses and conferences or the seminars you will conduct. If you have the authority to have that piece of work then you can surely include that in your CPD as that will be an excellent inclusion.
There are many services that you could provide in your engineering profession which will include:
CPD has to be well-written and should have loftiness in the writing style. This is an essential part of your CPD. However, if you are looking for well-written CPD writing then you should come to us. We have some of the best writers for writing CPD. Our writers will make sure that you have the best CPD written by the experts. Our writers will make sure that the grammatical errors and the spelling mistakes are avoided. Also, you can rest assured that our writers will deliver you CPD which will be free from plagiarism. We deliver the work within the given timeline. Moreover, we charge you for the services of our writers quite reasonably and we can also deliver the work on an emergency basis.
Therefore, if you need the best-quality CPD writing services for EA then our writers can deliver the exact writing piece you want.
CPD writing refers to Continuing Professional Development writing which is another important part of CDR and must not be taken for granted. It aims to provide information of how an engineer is trying to stay up-to-date with the advancement and changing technology and gives an overview of how much an engineer is inclined to the profession to be passionate enough to keep track of the latest information and have the latest skillset.
It is information of the workshops, conferences attended, projects undertaken and contributions made to journals or references to enhance one’s skills and knowledge. It shows how much you strive and to stay aligned to your chosen field of engineering. Our writers can frame the absolute best CPD for you so that your initiatives to stay in the field of engineering are projected to the EA members.
CPD is documentation or report of your knowledge, skills, and training gained by you as an engineer. It must depict that you are up-to-date with all the latest advances in your field of Engineering. It also helps you to prepare a document of the knowledge base you have developed till date and your skills that you have gained. Engineer’s Australia has specified the format of CPD and what it should include. While preparing a CPD, you must keep in mind the following few things:
Usually, CPD writing involves information based on two perspectives: training based and development based. Training based is the formal part of the CPD writing where information related to enhancing skills and knowledge is provided.
Development part is more of an informal approach where the entirety of the individual and the competency as an engineer is projected. The ability and will to develop as an engineer are both depicted from a fully formatted CPD. It shows an individual’s skills, knowledge as well as other attributes of management, leadership, mentorship, academics, writing skills, communications which are equally important in any reputed organization or firm.
A CPD is basically a documentation of knowledge, survey, skills gained by an engineer which provides relevant information of his/her inclination to the field and the initiative taken by an individual to gain knowledge of the latest advances in the field and contribute to the engineering field by volunteering or engaging in projects and courses.
It should provide information according to the following format of the exact duration of training, location and achievements, the type of volunteer work and contributions made to the engineering community with details. The format can be followed according to the chart below laid by the Engineers Australia.
A. | Any tertiary course took either as an individual course or for a formal post-graduate award | The study may be either on campus or by distance education. All such activities should involve some form of assessment |
B. | Short courses, workshops, seminars and discussion groups, conferences, technical inspections, and technical meetings | Technical meetings including Engineers Australia presentations Seminars and workshops delivered or facilitated by third-party practitioners in the field |
C. | Learning activities in the workplace that extend competence in the area of practice | Workshops, seminars and discussion groups for employees (activities that are normal work activities cannot be claimed as learning activities in the workplace) |
D. | The private study which extends your knowledge and skills | The private study includes the reading of books, journals, transactions, manuals, etc. Sufficient records must be kept of claimed personal reading (e.g., date, title, author and time invested) to address an auditor’s inquiry. This information should be recorded after you have read the article for audit purposes |
E. | Community engagement representing the engineering team | Service to the engineering profession may include: 1: serving in a volunteer capacity on boards and committees (not for profit organizations); 2 being a panel member on tertiary course accreditation visits; 3: being an interviewer on chartered status assessment panels; 4: reviewing technical publications before publication; 5: serving as a volunteer on other boards and committees which advance the engineering team; 6: mentoring a colleague for work experience purposes; 7: preparation of written submissions/contributions to, and participation in technical standards related meetings of organizations, such as Standards Australia, on areas relevant to your engineering work (whether representing Engineers Australia or another organization). |
F. | The preparation and presentation of material for courses, conferences, seminars, and symposia | The time for research, drafting, and presentation of material can be requested for CPD purposes if the material is equipped and obtainable by you and the happenings underwrite to the expansion of the vocation. |
Our team of writers can provide the perfect CPD writing services and use your information to prepare a CPD that will show you to be the perfectly relevant candidate with skills in the advanced fields of engineering. They will prepare the CPD in the correct format and would know exactly where to put your information so that it catches the eye of the employer. They may also provide you suggestions to quickly upgrade your skills in certain areas. The writers can frame your CPD in a very short time which will be perfectly reviewed and without any spelling errors or grammatical mistakes.
Our writers understand the value of a well- documented CPD and would prepare it with utmost care and intricacy. You can avail their help to achieve a good position in any reputable organization by passing the body of Engineers Australia and get selected for a bright future as an engineer.
S. No | Training Title | Start Date | Finish Date | Venue | Training Organization | Details |
1 | Factory Design 2013 Grundlagen | 03.12.213 | 04.12.2013 | Winkel, Switzerland | Mensch und Maschine | Software Training. It included training in such products as AutoCAD, Inventor, Show Case, Navisworks and the ability to synchronize between them. |
2 | Project Management Fundamentals | 21.04.2014 | 24.04.2014 | Moscow, Russia | Sealed Air | The course consisted of project management training, identifying key indicators and simulating situations when changing a technical task at a late design stage. |
3 | Line preparation | 10.09.2014 | 10.09.2014 | Root, Switzerland | Sealed Air | This event is organized as a demonstration of the possibility to the customer of the packaging line purchased by him, as well as to conduct training on the operation of equipment |
4 | Equipment training course | 24.11.2015 | 25.11.2015 | Root, Switzerland | Sealed Air | The course included training in working with new equipment VS9XDC, changing parameters and solving problems when alarms. |
5 | Marketing seminar | 22.09.2016 | 23.09.2016 | Volgograd, Russia | Sealed Air | At this seminar, I gave a presentation on our new capabilities in the development of packaging lines to get the product that is needed for the market. |
6 | SPIN® Selling Skills | 24.01.2017 | 26.01.2017 | Huthwaite International | Moscow, Russia | The course helped to understand the new method of communication with customers in order to sell our solutions to solve existing customer problems. |
7 | Event at the European Exhibition Centre Pack Forum. | 05.04.2017 | 06.04.2017 | Paris, France | Sealed Air | At this seminar I gave a presentation on the choice of packaging systems that best suit the objectives of the enterprise and the benefits of automation. |
8 | Development of presentation skills | 06.03.2018 | 07.03.2018 | Moscow, Russia | The Centre for Business Skills Development | The course helped to understand the correct structure and various options of the presentation. |
9 | Seminar at the European Exhibition Centre Pack Forum Code | 21.03.2018 | 23.03.2018 | Paris, France | Sealed Air | At this seminar I gave a presentation on the choice of packaging systems that best suit the objectives of the enterprise and the benefits of automation. |
10 | Ethics of business communication | 15.05.2018 | 16.05.2018 | Moscow, Russia | The Centre for Business Skills Development | The course helped to understand the rules of communication between colleagues, company structures and between representatives of various companies. |
11 | Negotiation skills | 11.09.2018 | 12.09.2018 | Moscow, Russia | The Centre for Business Skills Development | The course helped to understand the negotiating structure in order to arrive at a mutually beneficial solution. |
12 | Equipment training course | 18.09.2018 | 20.09.2018 | Root, Switzerland | Sealed Air | The course included training in working with new equipment BL77T, changing parameters and solving problems when alarms. |
13 | Material training | 09.10.2018 | 10.10.2018 | Italy | Sealed Air | In this course, I understood and saw the basic structures of films and bags, and so the production technology of each. |
14 | Effective negotiation | 23.10.2018 | 24.10.2018 | Moscow, Russia | The Centre for Business Skills Development | The course taught to recognize the type of people according to the DISK principle and conduct the type of negotiations that is most effective for a given customer representative. |
15 | Finance for non-financial managers | 27.05.2019 | 28.05.2019 | Moscow, Russia | The Centre for Business Skills Development | The course helped to understand the basics of accounting, methods of EBITDA calculating, and recognizing the company's industry and its effectiveness. |
We hold the apex position in providing services regarding CDR writing for engineers Australia. We are known to have very high success records for consistent team of professional writers having years of experience in the field of CDR preparation. We provide the best and trusted service for CDR writing and reviewing of all kinds of engineering disciplines. We provide services for career episode writing, plagiarism check and removal etc.
Should you need any further information, please do not hesitate to contact us.
Contact: +61-4-8885-8110
WhatsApp: +61-4-8885-8110
(Australia, USA, UK, UAE, Singapore, New Zealand)